This product for repair any hole like cigarette burn or crack problem on PVC/vinyl with a heat gun or sealing iron. BT. Pattern Moulding Set is required.
 
How to fix the Coated Canvas 
1. Prepare the Grain (Coated Canvas Reverse Pattern) by using BT.Pattern Molding Set                   a. Knead the mixture, White and Blue Clay as ratio 1:1 and roll out above the needed pattern. Should be beside the damage position.
          b. Let it dry at room temperature for 5-10 mins. Make sure that the reverse pad have the equal thickness, approx. 2-3 mm. thick.
2. Prepare the surface of Coated Canvas by cleaning properly with BT.Surface Cleansing Mousse, wipe the surface to remover the access mousse, and also remove the dirt well.
3. Fill the BT.Vinyl Repair to the damaged area. Afterward, attached the pattern pad which face the pattern side to the BT.Vinyl Repair.
4. Heat over the Pattern Pad until the BT.Vinyl Repair turn the color from white to complete transparent.
5. Recoloring the surface as normal procedures.

***The container may be varied due to the different amount of products